PC200 Series - Including PC200-1, PC200-2 and PC200-3

• Download the PC200 Operator's Manual in PDF format

  Description

  The PC200 is a high volume, high capacity, stationary crimper, utilizing microprocessor control for the fastest, most accurate crimping system available. Crimp settings, dwell time, pre-set start positions and auto/manual operation are all easily set with electronic controls. This production crimper is a quick and easy way to make factory quality hose assemblies. The standard package is the PC200-1 crimper which includes a 7.5 HP, 230V/3 phase pump and foot pedal. The optional PC200-2 crimper includes a 7.5 HP, 480V/3 phase pump and foot pedal. The optional PC200-3(Single phase) includes a 5 HP, 220V single phase pump and foot pedal.
   

  Features

  • Hose feed is horizontal from both front or rear.
  • Accurate Electronic PLC Crimp Diameter Adjustment
  • Manual or automatic mode
  • Maximum Die Opening: Die Closed Diameter +38mm
  • 340 ton cylinder
  • Automatic shut off for precise crimps
  • Power return stroke and return limit control
  • Rapid retraction of die fingers through hydraulic system
  • Die Sets easily changed using hand tool
  • Accommodates bent tube/elbow couplings with the ability of installing 2", 90 degree fittings on both ends.

  Capability

  • 1/4" through 2" ID, 2 wire braid hose and 2" 6 spiral hose with all coupling end styles including most bent tubes.

  Power Source

  • 7.5 HP, 230V AC, 3 phase, 60 Hz PC200-1
  • 7.5 HP 480V AC, 3 phase, 60 Hz PC200-2
  • 5 HP, 220V AC, Single Phase, 60 Hz PC200-3 (Single phase)

  Oil Capacity: 8 gallon
  Mounting: Bench or cabinet
  Dimensions: 18.5" deep x 27.5" wide x 31.5" high (without die cabinet)
  Weight: 573 lbs (excluding cabinet)

  Dies:

  PC 125 Die Set	Part Number	ID	Part Number	ID
  	PC200-8.5	8.5mm	PC200-34	34mm
  	PC200-12	12mm	PC200-41	41mm
  	PC200-14	14mm	PC200-45	45mm
  	PC200-16	16mm	PC200-50	50mm
  	PC200-19	19mm	PC200-56	56mm
  	PC200-23	23mm	PC200-62	62mm
  	PC200-27	27mm	PC200-69	69mm
  	PC200-31	31mm	PC200-74	74mm
  			PC200-78	78mm

  Options

  • PC200-1Skit includes the PC200-1 crimper and 10 die sets including 16mm, 19mm, 23mm, 31mm, 41mm, 50mm, 56mm, 62mm, 69mm, 78mm dies for 1/4" to 2" 1-braid to 6-spiral hose.
  • PC200-2Skit includes the PC200-2 crimper and 10 die sets including 16mm, 19mm, 23mm, 31mm, 41mm, 50mm, 56mm, 62mm, 69mm, 78mm dies for 1/4" to 2" 1-braid to 6-spiral hose.
  • PC200-Rack–Black Die Cabinet 20" deep x 30" wide x 29" high
  • PC200-MBS–Manual Back Stop
  • PC200-EBS–Electric Back Stop

  Replacement Parts

  • PC900-Grease-1lb–High Pressure grease in a 1 lb. can
  • PC900-AerosolLube–High Pressure grease in an aerosol can
  mm, 23mm, 31mm, 41mm, 50mm, 56mm, 62mm, 69mm, 78mm dies for 1/4" to 2" 1-braid to 6-spiral hose.
• PC200-Rack–Black Die Cabinet 20" deep x 30" wide x 29" high
• PC200-MBS–Manual Back Stop
• PC200-EBS–Electric Back Stop

Replacement Parts

• PC900-Grease-1lb–High Pressure grease in a 1 lb. can
• PC900-AerosolLube–High Pressure grease in an aerosol can