Xtra-Grip™

Download the Xtra-Grip™ Brochure

Goodyear Engineered Products XTRA-GRIP™ conveyor belting provides increased material transfer inclines of five degrees or more due to its 1/4" high Chevron ribbed pattern versus conventional smooth belting. XTRA-GRIP is available in either 2-ply 250 PIW or 3-ply 375 PIW nylon/nylon abuse resistant construction.

Tension Range: 220 PIW, 250 PIW, 330 PIW and 375 PIW

Download the complete brochure for this product, including technical data and product specifications. [Adobe PDF*]

Features and Benefits

	Load gripping rib pattern The ribs of XTRA-GRIP belting are 1/4" high chevrons that increase the permissible angle of incline by 5 degrees or more. XTRA-GRIP works especially well with materials that have a high water content where slipping of reload on the belt might otherwise occur. The staggered Chevron design can be run in either direction and are an integral part of the belt.
	Excellent fastener holding retention High strength nylon fill cords enhance mechanical fastener holding ability and resist fastener pull-out for more reliable performance and increased uptime.
	Excellent rip, tear and impact resistance Specially designed crimped warp cords straighten on impact and then recover their original shape. This enables the fabric to absorb greater impact loads and resist tearing for long-lasting durability and lowest cost-per-ton conveyed.
	High ultimate strength XTRA-GRIP belts withstand severe tension spikes at start-up, retain mechanical fasteners and withstand continuous flexing around pulleys. This higher ultimate strength makes a critical difference in abusive operating conditions.
	Reduced stretch The combination of fabric design and dip process provides less elastic and permanent elongation on all specifications. This minimizes take-up concerns and reduces the number of splices at break-in. Contact your local Goodyear Engineered Products representative to calculate permanent and elastic elongation requirements for your specific systems.
	Standard bias step splices A quick and effective technique, step splices greatly reduce downtime and are recognized throughout the industry as the standard. The vulcanized splice in XTRA-GRIP retains 100% of belt tension rating during running conditions.
	Variety of cover compounds Protect your product with the proper compound and cover gauge for the application. Goodyear Engineered Products XTRA-GRIP conveyor belting can be customized to fit your application.